| Function | 2/3/4-pole measurement for earth resistance, soil resistivity, earth voltage, AC voltage |
| Power Supply | DC 9V( Alkaline dry battery R14S 1.5V 6 PCS, continuous standby for 300 hours ) |
| Measurement Range | Earth Resistance: 0.00Ω-30.00kΩ |
| Soil Resistivity: 0.00Ωm-9000kΩm |
| Earth Voltage: 0V～600V |
| Measurement Mode | Precise 4-pole measurement, 3-pole measurement, simple 2-pole measurement of earth resistance |
| Measurement Method | Earth Resistance: rated current change-pole method, test current 20mA Max |
| Soil Resistivity: 4-pole method (Wenner method) |
| Earth Voltage: average rectification(between P(S)-ES) |
| Test Frequency | 128Hz/111Hz/105Hz/94Hz(AFC) |
| Short-circuit Test Current | AC 20mA max |
| Open-circuit Test Current | AC 40V max |
| Test Voltage Wave | Sine wave |
| Electrode Distance Range | Can be set 1m-100m |
| Shift | Earth resistance: 0.00Ω-30.00kΩ automatic shift |
| Soil Resistivity: 0.00Ωm-9000kΩm automatic shift |
| Backlight | Controllable white screen backlight, suitable for dim places |
| Display Mode | 4-digital super-large LCD display, white screen backlight |
| Measurement Indication | During measurement, LED flash indicator, LCD count down display, progress bar indicator |
| LCD Frame Dimension | 128mm×75mm |
| LCD Display Dimension | 124mm×67mm |
| Meter Dimension | 215mm(L)×178mm(W)×83mm(H) |
| Standard Test Wire | 4PCS: red 20m, black 20m, yellow 10m, and green 10m |
| Simple Test Wire | 2PCS: red 1.6m and black 1.6m |
| Auxiliary Ground Rod | 4PCS: Φ10mm×150mm |
| Measurement Time | Earth Voltage: about 3 times/second |
| Earth resistance, soil resistivity: about 5 seconds/time |
| Measuring Times | Over 5000 times (Short-circuit test, interval time should be at least 30 seconds) |
| Line Voltage | Below AC 600V measure |
| Communication Interface | RS232 interface, software monitoring, storage data can be uploaded to computer, saved or printed. |
| Communication Cable | 1PCS RS232 communication cable, length 1.5m |
| Data Storage | 300 groups, “MEM” symbol storage indicator, flash display “FULL” symbol indicate storage full |
| Data Hold | Data hold function: “HOLD” symbol display |
| Data Read | Data read function: “READ” symbol display |
| Overflow Display | Over range overflow function: “OL” symbol display |
| Interference Test | Recognize interference signal automatically, “NOISE” symbol display when interference voltage exceed 5V |
| Auxiliary Ground Test | With auxiliary earth resistance test function, 0.00KΩ-30KΩ(100R+rC<50kΩ, 100R+rP<50kΩ) |
| Alarm Function | Measurement value exceeds alarm setting value, will “Toot-toot-toot” alarm hint |
| Battery Voltage | While battery voltage decreases to around 7.5V, will display battery voltage low symbol“ ”, and reminding to replace the battery |
| Working Current | Standby: about 20mA (Backlight close) |
| Boot up and open backlight: about 45mA (25mA backlight close) |
| Measurement: about 100mA (Backlight close) |
| Weight | Tester: 950g |
| Test wires: 1560g |
| Auxiliary ground rods: 935g (4pcs) |
| Working Temperature & Humidity | -10℃-40℃, below 80%rh |
| Storage temperature & humidity | -20℃-60℃, below 70%rh |
| Overload Protection | Measuring earth resistance: between each interfaces of C(H)-E、P(S)-ES, AC 280V/3 seconds |
| Insulation Resistance | Over 20MΩ (between circuit and enclosure it is 500V) |
| Withstand Voltage | AC 3700V/rms (Between circuit and enclosure) |
| Electromagnetic Features | IEC61326(EMC) |
| Suitable Safety Standard | IEC61010-1 (CAT Ⅲ 300V、CAT IV 150V、Pollution 2), IEC61010-031, IEC61557-1 (Earth resistance), IEC61557-5 (Soil resistivity), JJG 366-2004 |
